Axle Boundary Axis Border defines the distance between the contour line and the axle axis label. The lengths of the drawn axles axes are automatically adjusted by the program thanks to with the Axis LimitBorder command.
| Table of Contents |
|---|
Location of Axis
...
Border Command
...
It is located under the Move Axis Label command list under the Modify Tab.
...
...
Axis Border Margins
...
Specifications |
|---|
Left  Enter the distance between the left side of the axis border and the contour line. |
Right  The distance between the right side of the axis border and the contour line is entered. |
Top  Enter the distance between the upper side of the axis border and the contour line. |
Bottom  Enter the distance between the underside of the axis border and the contour line. |
Apply to all drwaings  If the option is selected, the values entered are applied to the axis borders in all drawings. |
Usage Steps
You can change the axle limits axis borders at any time. For this;
Click on the axle limit axis border icon.
The axis limits border settings dialog will be displayed. Here you can see your distance between the current axis limit border contour line.
...
When the axle limits axis border are 0 cm, the axle limits axis borders are as follows.
...
Change the limit border values to 50 cm by clicking the axle limits axis borders icon again.
...
When you click the OK button, your axle limits axis borders will change.
Usage step |
|---|
Axis borders when border values are 0 cm  |
Axis borders when border values are 50 cm  |
...
Next Topic