Axis Settings
The Axis Settings dialog consists of four tabs: General, Label, Info Text , and Units . In each of these tabs, there are parameters related to the axis, such as the axis name, line color and type, label and text color that can be changed by the user.
Location of Axis Settings Dialog
Axis is also available in the axis toolbar that appears after the axis command is run.
In the Architectural Program
You can access it under the ribbon menu, Home tab, Axis heading.
In the Structural Program
You can access it under the ribbon menu, Concrete tab, Axis heading.
General Tab
Specifications |
---|
Axis ID and ID suffix The name of the axis is the name of the axis that appears in the circle in the plan. The character entered in the suffix line is added to the end of the axis name. For example: If 1 is entered additionally, A axis is named as A1, B axis as B1, and 1 axis as 11. This parameter can be used when adding intermediate axises to the project (such as B1 or B 'axis when adding a new axis between B and C axises). |
Extend to axis border If the option is selected, the axis lengths are automatically drawn by the program according to the "Contour lines" and "Axis border" layout. The ends of the axises that intersect the contour line are extended to the "Axis border" determined according to the contour line. "Left delta" and "Right delta" values are used to lengthen or shorten the left or right end of the axis. A negative value indicates that the related end of the axis will be shortened, while a positive value will lengthen. |
Linetypes Line types and line colors can be assigned separately for inside and outside the contour parts of the axis with the inside and outside line type parameters. If the "Draw line inside contour polygon" option is checked, the axis is drawn within the contour, with the inline contour type properties. Otherwise, the part of the axis within the contour is not drawn. |
Draw line perpendicular outside contour polygon It ensures that the part outside the contour is drawn straight on the axises with an incline. |
Mark as secondary axis |