This connection is a With the Single Plate Connection command, column-beam connection is defined.
...
Location of the Single Plate Connection Command
...
Single Plate Connection Settings Dialog
Type Tab
...
Specifications |
|---|
Plates  It is chosen whether the plate will be on the left or right of the beam body. |
Schematic drawing  The connection is shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Plates Tab
...
Specifications |
|---|
Single plate  The properties of the plate are determined by entering the values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview  There is a preview of the combination. The selection made and the entered values can be followed simultaneously in the preview. |
Top/Bottom Notch Tabs
...
Specifications |
|---|
Notch  If the option is selected, notching is done according to the entered values and selections. The values to be entered are shown in the schematic drawing. |
Left flange cut  If the option is selected, left flange cutting is made according to the entered values. The values to be entered are shown in the schematic drawing. |
Right flange cut  If the option is selected, right flange cutting is made according to the entered values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Joining, notching and cutting values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview |
Beam Bolts Tab
...
Specifications
Horizontal arrangement
Horizontal arrangement settings (number of horizontal bolt columns, distance values ..) of beam bolts are entered. The values to be entered are shown in the schematic drawing.
Group 1
Beam bolts settings (number of lines, distance values ..) are entered. |
The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog.
Schematic drawing
Connection and bolt placement values are shown on the schematic drawing.
Preview
There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview.
Welds Tab
In the Welds tab, the weld properties of the joints given in the schematic representation are set.
...
Specifications |
|---|
Welds |
 The thickness, type and angle values of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered. |
Weld electrode |
 The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld connection is controlled under the condition that it has less strength than the weld strength. To create the welding electrode, provide the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New". |
| title | Moreover |
|---|
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint properties. Geometry features are in accordance with industry standards and in the form specified in AISC. |
 |
Schematic drawing |
 Connection and welds values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Beam Bolts Tab
...
Specifications |
|---|
Horizontal arrangement Horizontal arrangement settings (number of horizontal bolt columns, distance values ..) of beam bolts are entered. The values to be entered are shown in the schematic drawing. |
Group 1 Beam bolts settings (number of lines, distance values ..) are entered. The values to be entered are shown in the schematic drawing. |
Bolt properties The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing Connection and bolt placement values are shown on the schematic drawing. |
Preview |
There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Design Data Tab
...
In the design data, the plate connection elements material is defined.
...
The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...
If necessary, click the list and define "Create New…". To create the plate connection elements material, give the information material definations definitions and values in the dialog that opens after clicking "Create New".
...
Next Topic