Scale commands allow you to change With the scale command, the size of the shapes of 2D objects (such as line, circle, arc) is changed. There are 2 different commands for scaling in the program; scale and scale by reference.
| Table of Contents |
|---|
Objects are enlarged/reduced by using the mouse or by entering a value after the reference point is determined.
Location of the Scale
...
Command
You can access the Scale /Scale by Reference commands command under the Modify heading in the ribbon menu Drawings tab .
...
...
Usage Steps
...
Click the Scale icon in the ribbon menu .
Select the entities you want to scale.
Complete the selection step by clicking the right mouse button. The shape of the cursor will change.
After giving the base point, the objects you selected will enlarge and shrink with the movement of your mouse.
When it reaches the dimensions you want, click the left button of your mouse.
Process step
Usage Step |
|---|
Selecting the objects to scale  |
Giving the base point  |
Sizing up and down as desired  |
After scale  |
...
Next Topic
...
Functions the same as the scale command. The different side is that you can decide numerically the magnification or reduction ratio of the objects.
Click the Scale by Reference icon in the ribbon menu .
Select the entities you want to scale.
Complete the selection step by clicking the right mouse button. The shape of the cursor will change.
Click with the left mouse button to give the base point.
In the dialog that comes up, enter the current scale (for example 1) and click the OK button.
The same dialogue will come across you again. Enter the new scale (eg 2). The selected objects will be scaled. According to the example we have given, the length of a line with a length of 1 meter in the drawing area will increase to 2 meters.
...
Steps order
...
Scale by reference operation in plan
...
Selecting the objects to scale
...
Giving the base point
...
Entering current scale (e.g. 1)
...
Entering new scale (eg 2)
...
...
After scale by reference
...
Related Topics