Page Comparison

Axis Border defines the distance between the contour line and the axis label. The lengths of the drawn axises axes are automatically adjusted by with the program thanks to the Axis Border command.

...

Location of Axis Border Command

It is located under the Move Axis Label command list under the Modify Tab.

...

Axis Border Margins

...

Specifications
Left Image Modified Enter the distance between the left side of the axis

boundary

border and the contour line.

Right Image Modified The distance between the right side of the axis

boundary

border and the contour line is entered.

Top Image Modified Enter the distance between the upper side of the axis

limit

border and the contour line.

Bottom Image Modified Enter the distance between the underside of the axis

limit

border and the contour line.

Apply to all drwaings Image Modified If the option is selected, the values ​​entered are applied to the axis

limits

borders in all drawings.

Usage Steps

You can change the axis borders at any time. For this;

• Click on the axis border icon.

• The axis border settings dialog will be displayed. Here you can see your distance between the current axis border contour line.

...

• When the axis border are 0 cm, the axis borders are as follows.

...

• Change the border values ​​to 50 cm by clicking the axis borders icon again.

...

• When you click the OK button, your axis borders will change.

Usage step
Axis borders when border values ​​are 0 cm Image Added
Axis borders when border values ​​are 50 cm Image Modified

...