Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

You can add pictures to your project. Program * .bmp, * .jpg, * .jpeg, * .tiff, * .png, * .tga, * .sgi, * .pcx, * .psd, * .cut, * .afp, * .ico, * .cur, * .ani, * .pcd, * .fpx, * .pbm, * .pgm, * .ppm, * .sct, * .ras, * .xpm, * .xwd, * .wfm, * .wpg supports formats.

Image Command Location

In the Architectural Program

You can access it under the ribbon menu Drawings tab, Primitive Objects title

In Static Program

You can access it under the ribbon menu Drawings tab, Primitive Objects title

Picture Adding Operation Steps

To paste a picture in the drawing area:

  • Click the Picture icon in the ribbon menu .

  • If there is no picture selected, the program will warn you. Clicking the OK button will open the Picture Settings dialog.

  • Click the Preview area or the Browse button from this dialog . Select an image file from the Image Settings dialog that opens and click the OK button.

  • The selected image will be displayed in the "Front Image" area. Set the image sizes and click the OK button to exit the dialog.

  • The picture frame with the mouse cursor will be displayed on the screen.

  • Click the point where you will paste the picture with the left mouse button. The picture will be pasted in the drawing area.

The location of the pasted image can be changed using the move command. However, the picture cannot be rotated.

The parameters in the Picture Settings dialog are:

Width: The width of the picture in the drawing area.

Height: The height of the picture in the drawing area.

Angle: The angle of the picture in degrees. When you want to rotate the image, a value is entered in this row.

Save picture in project: If checked, the picture will be saved in the project. With this option, when the project is saved, the picture does not need to be in the external environment. It is stored within the project. If not checked, the picture is not stored in the project. The program searches for the picture in the folder to which it was added. When the project is taken to another computer, the picture must be taken with it.

Height proportional to width: If checked, the height of the picture is adjusted according to the width entered, according to the original aspect ratio of the picture.

Symmetry: If checked, the symmetry of the selected picture will be taken.

  • No labels