This connection is a column and beam connection. After the column and beam are defined;
With quick drawing mode turned on;
From the connection menu, click the Single Angle Connection icon.
In 3D perspective view, move the mouse pointer closer to the element, close to the support
After this process, the virtual image of the connection will appear.
If the connection is suitable, create the connection by clicking the left mouse button.
The connection will occur with default settings.
Quick drawing mode is off;
From the connection menu, click the Single Angle Connection icon.
Click the column then the beam before the 3D perspective view.
The connection will occur with default settings.
Double-click the connection to change settings. The connection dialog will open.
Type and Placement Tab
Select the options given in the schematic representation according to the type of connection you want to make.
Angle Tab
The geometry of the angle used is given or one of the L profiles in the library can be used as a connection element with the Use Section option. If you check the plate geometry option, enter the plate dimensions according to the schematic representation.
Top Notch Tab
The notch geometry of the top of the beam element connected to the column is adjusted.
Bottom Notch Tab
The notch geometry of the bottom part of the beam element connected to the column is adjusted.
Support Bolts Tab
The properties of the bolts connecting the plate to the column are adjusted. The tab can be seen when the option with bolt to the support is selected from the type and layout tab.
Beam Bolts Tab
The properties of the bolts connecting the plate to the column are adjusted. The tab can be seen when the option with bolt to the support is selected from the type and layout tab.
Weldings Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
Weld Electrode:
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Design Data Tab
In the design data, the plate material is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Strength" in the dialog that opens after clicking "Create New".