This joint is used to connect steel elements by welding. After the elements are defined;
From the Steel menu, click on the Welded Joint row.
Click the elements you want to combine sequentially from the 3D perspective view.
Press the right mouse button to finish the selection.
The combination settings dialog will open.
You can edit the settings in this dialog.
General Settings Tab
Determine the type of weldment.
Resources Tab
The source properties of the joints given in the schematic representation are set in the Resources tab. Give the thickness, type, angle values and mark the option whether to weld under construction site conditions.
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint properties. Geometry features are in accordance with industry standards and in the form specified in AISC.