The Secondary Stair Deformation command is used to move some points on the ladder to move to different arrangements in the ladder. Secondary ladder deformation points are located on the guardrails and the exit line line. The movement of the deformation points on the balustrades only affects the form of the railing. The movement of the points on the line of the exit line, on the other hand, affects the exit line and, accordingly, the step widths, stair balancing.
For secondary ladder deformation:
Click the Stair Deformation icon in the ribbon menu .
Click the Secondary Stair Deformation icon from the Ladder Deformation toolbar .
On the stairs in the drawing area, the points where you can deform the staircase will be marked.
Move the mouse cursor over the point you want to move and click the left button.
Drag the mouse. The clicked point will move with the mouse. With the moved point, the guardrails or exit line connected to this point will also be deformed.
Click the left mouse button. The relevant point will be moved to the clicked place.
It is possible to deform the stairs in this way and adapt them to the required geometry.
By creating new snap points (joints) for stair deformation, you can make a node deformation.
Click the Add Secondary Node Point icon from the Ladder Deformation toolbar .
Move the mouse cursor to a suitable place on the ladder (railing or exit line) in the drawing area and left click.
The program will create a new node at the point you clicked.
The Delete Secondary Node command is used to delete nodes created with the Add Secondary Node command on the ladder .
Click the Delete Secondary Node Point icon from the Stair Deformation toolbar .
Move the mouse cursor over one of the joints on the ladder.
The program will delete the node you clicked on.
If the ladder is deformed using the previously deleted joint point, when the joint is erased, the deformed point will automatically return to its original position.
By using Secondary Stair Deformation, the changes made in the ladder are abandoned, if the ladder is desired to be restored, the Cancel Secondary Stair Deformation command is used. For this:
Click the Cancel Secondary Ladder Distortion icon from the Stair Distortion toolbar .
Click the ladder you want to restore with the left mouse button.
Secondary Ladder deformations will be canceled, the ladder will return to its previous state.
