Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Analysis, calculation and concrete results of the retaining wall, the list of selected rebars are shown in the Retaining Wall Reinforcements dialog.


Location of Retaining Wall Reinforcements Dialogue

After the Retaining Wall Analysis is done, you can access it by clicking the Retaining Wall command under the Concrete Design heading in the ribbon menu Analysis and Design tab.

Retaining Wall Sections

Retaining Wall Reinforcements

Specifications

Retaining wall and rebar list

The list of all rebars selected in the retaining wall as a result of the calculation is shown as a table. Rebars were selected automatically by the program. Double click on the cell to change the related rebar.

Preview

There is a preview of the retaining wall selected from the list.

Vertical loading - without earthquake free

Information on external stability controls obtained as a result of without earthquake loading is printed under this section.

Shear controls - without earthquake

Information on internal stability controls obtained as a result of without earthquake loading is printed under this section.

Up direction quake (1 + kv)

Information on external stability checks obtained as a result of loads in up direction quake conditions are printed under this section.

Shear controls (1 + kv)

Information on internal stability controls obtained as a result of loads in up direction quake condition is printed under this section.

Down direction quake (1-kv)

Information regarding the external stability controls obtained as a result of the loads made in the event of a down direction quake is printed under this section.

Shear controls (1-kv)

Information regarding the internal stability controls obtained as a result of the loads made in down direction quake conditions are printed under this section.

Downfall details

A dialogue will open with details of the downfall accounts.

Downfall Analysis

Specifications

Schematic drawing and coordinate selection area

Schematic drawing of the retaining wall. The program makes iterations using the slice method. By clicking on the figure on the screen, the account values ​​for different downfall circle can be displayed.

Without quake

Lists information on downfall circle for without quake situations.

Up directional quake (1 + kv)

Lists information on downfall circle for up directional quake situations.

Down directional quake (1-kv)

Lists information on downfall circle office for down directional quake situations.

Results

The results of the selected coordinate are listed.

Calculated coordinate

By pressing the Calculated Coordinate button, it is possible to display the data of the re-calculated flat.

  • No labels