Preferences

Selected

Traces are created on the selected objects to show that they have been selected. In this option, the color of these traces is set. Whichever color was set, the object takes on that color when it is selected.

Background (2D)

The color of the 2D worksheet is set.

Background (3D- Top)

The color of the top of the 3D worksheet is adjusted.

Background (3D- Bottom)

The color of the bottom of the 3D worksheet is adjusted.

Autosave

By checking the autosave option, the project will be automatically backed up at the specified interval. Project backups will be automatically saved to the folder where the main file is located during the run.

Work with backups (* .bak)

By activating the option, a copy of the previous version of the project with bak extension is created during the project registration process.

Load last project on startup

If checked, the last worked project will be loaded automatically when the program is opened.

Draw column axis

The color of the line indicating the major direction of the column is adjusted. If the option is selected, this line is shown in the plan.

Use ribbon menu

If checked, it works with the ribbon menu layout and if unchecked, it works with the classic menu layout. After the option is changed, you have to exit the program and run it again in order to use the selection.

Auto scale ribbon icons according to DPI

It allows the program to automatically adjust the ribbon menu icon sizes according to the resolution of your computer screen. It helps to solve the problem that icons appear small on high resolution screens.

Use right button for context menu

If this option is selected, the right menu opens when the right mouse button is pressed. When the mouse is hovered over an object and the right mouse button is clicked, a list of the most used commands related to the object will be opened.

If the option is not selected, the right mouse button will work as a command repeat.

Apply settings to all drawing windows

It will ensure that the settings made for the current drawing window will also be valid for other currently open windows.

Show nodes

It allows the node points to be visible in the plan or not. If checked, nodes are visible in the plan and not visible if not marked.

Radius

In case the node points are shown, the diameter of the visible in the plan is set on this line. Its unit is pixel.

Color

In the case where the node points are shown, the color shown in the plan is selected.

Selected color

In case the nodes of the selected object are shown, the color shown in the plan is selected.

Node snap factor

During node selection, the distance to click is set. If the mouse cursor is around the node snap factor near the node, it allows the node to be selected by clicking the left button.

Snap distance

During the object selection, the distance to be clicked is adjusted. If the mouse cursor is around the object's snap distance setting, you can select the object. The value entered here also affects the difficulty / ease of selection (its unit is pixel).

Snap to grid

Used for the cursor to catch the intersection points of the grid lines. Mark the line for locking possibility.

Snap to nodes

Used for the cursor to jump (snap) to nodes. Check the locking facility line.

Snap to grid as nodes

Check if you want the cursor to catch the grid points while in object mode.

Ortho active

Check if you want to turn on ortho mode. Vertical mode provides ease of drawing objects at 0 and 90 degrees.

General geometry check

Mark for automatic general geometry check. It is recommended to keep the line marked in order to immediately avoid possible errors (geometric errors) that may be encountered while drawing.

Draw horizontal size of column & shearwall dimensions first

When this option is selected, in places where column and shearwall names are written such as formwork, column application, report, the dimension of the column and shearwall dimensions parallel to the x axis is written first. For example, let's define a column that is 25 vertical and 60 cm horizontal. We can define the program possibilities as we want by rotating this column. When this option is checked, the column dimensions will be written as 25/60 regardless of how the definition is made.