After the architectural projects prepared with ideCAD Architecture are examined with ideCAD Structural, analysis and design is done and the analysis and design results are examined.
Open the working file with the ideCAD Structural program.
Click the Analysis Settings command.
Click the 2018 TDY Wizard for Analysis Settings command.
Specify the project information in order from the Parameters Input Screen for TDY 2018 window that opens.
From the Analysis Settings window, select Seismic Forces Calculation Method as the Mode Combination Method Using Response Spectrum.
4.8.5 Basement Calculation Method Using Modal Analysis section, select Separate Analysis for basements.
Select Use Semi Rigid Diaphragms from the Slab Diaphragms Modelling Method section.
Close the window by clicking the OK command.
Click Analysis Design tab in the ribbon menu.
Open the Concrete list from the Design Parameters section.
Click the General Concrete Reinforcement Parameters command from the Concrete list .
General Concrete Reinforcement Settings window will open.
In the General Concrete Reinforcement Settings window, minimum reinforcement interval, minimum general rebar joining length, rod length, etc. set the parameters and click OK to close the window.
Click the Column Parameters command from the Concrete list.