Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »


  • The X and Y direction β tE increment coefficients obtained from this calculation for both directions are applied for the upper section elements as per TBDY 4.8.4.

  • The internal force results and displacements determined under the earthquake effect of the upper section are automatically increased by the program with this coefficient. This increase is not valid for vertical earthquake effects and vertical loads. Increment over loading combinations is shown below.

  • The coefficients determined for the X and Y directions of the building are as follows:

  • No labels