B2, Stiffness Irregularity Between Adjacent Stories, Stiffness Irregularity Coefficient defined by dividing the average storey drift ratio at any ith storey, excluding basements, by the average relative storey drift ratio in an upper or lower storey, for either of two perpendicular earthquake directions This is when ηki is more than 2.0.
ηki = (Δi(X)/hi)ort / (Δi+1(X)/hi+1)ort > 2.0 veya
ηki = (Δi(X)/hi)ort / (Δi-1(X)/hi-1)ort > 2.0According to Table 3.6 , the calculation of the relative storey drifts is made according to the Equivalent Earthquake Load Method described in TBDY Section 4.7 , taking into account the +- 5% eccentricity effects . It is detailed in the earthquake regulation report.
If you want to check this report A1- Bina Burulma Düzensizliği Kontrolü section of the program, which is calculated with help from data obtained from the interface excel Δi,meanyou need to make additional accounts using excel value.
There is no B2 type irregularity in the building.