Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Symbols

FS = Local ground effect coefficient for short period region
F1 = Local ground effect coefficient for 1.0 second period
SDS = Short period design spectral acceleration coefficient [dimensionless]
SD1 = Design spectral acceleration coefficient for 1.0 second period [dimensionless]
SS = Short period map spectral acceleration coefficient [dimensionless]
S1 = Map spectral acceleration coefficient for 1.0 second period [dimensionless]
T = Natural vibration period [s]
TA = Horizontal elastic design acceleration spectrum corner period [s]
TB   = Horizontal elastic design acceleration spectrum corner period [s]
TL = Transition period to the constant displacement region in the horizontal elastic design spectrum [s]
Sae(T ) = Horizontal elastic design spectral acceleration [g]


  • The map spectral acceleration coefficients Ss and S1 values ​​of the coordinates, specified at Building Geometry and Location, were obtained from the AFAD earthquake map data using the Analysis Wizard online option.

  • According to the ZA local soil class specified in the geotechnical report, local soil effect coefficients are obtained from TBDY 2018 Table 2.1 and the Design spectral acceleration coefficients are automatically calculated by the program.

Ss

0.706

S1

0.205

Fs

0.8

F1

0.8

SDS

SD1

TA

TB

  • The horizontal elastic design spectral accelerations Sae(T), which are the ordinates of the horizontal elastic design acceleration spectrum for any earthquake ground motion level considered, are defined in terms of gravitational acceleration [g] depending on the natural vibration period.

  • Based on the coordinates, the spectral acceleration coefficients obtained from AFAD and the horizontal elastic design spectrum Sae(T) are determined according to the formula below. For the horizontal elastic design spectrum, it is represented by a total of 4 functions, different in each region, is shown in the graph below.

  • In order to create the spectrum, the time should be increased with appropriate intervals starting from 0 seconds and stopped at an appropriate T value after TL=6 s. For this building, the horizontal elastic spectrum starting from T=0 s to T=8 s with 0.05 intervals is calculated in the excel. The obtained spectrum is given in the image below.

  • No labels