Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

With the cover options, different objects can be created by closing the desired surfaces in the tube object.

Location of Cover Options

You can access the cover options from the tube object settings dialog.

Options

Outside

If checked, the outer surface of the tube object is created.

Cover top

If checked, the top surface of the tube object is created.

Cover bottom

If checked, the bottom surface of the tube object is created.

Cover inside

If checked, the inner surface of the tube object is created.

Cover Options

When all cover options are checked

When outside is unchecked

When cover top is unchecked

When cover inside and cover top are unchecked

When cover bottom and outside are unchecked

 

  • No labels