With the R Purlin command, r purlins of steel design are created.
Location of R Purlin Command
You can access it under the ribbon menu Steel tab, Steel heading.
Usage Steps
Click the R Purlin icon from the ribbon menu .
Steel purlin toolbar will open.
Select a profile from the list by clicking on the profile list in the steel purlin toolbar.
Choose the first of the steel beams or truss overhead heads that the R purlins will form between
When you select your second steel beam or truss head, the R purlin settings dialog will open.
In the dialog, there are parameters such as the height of the R purlin module, the number of purlins, the layout, etc. After making the settings, click the OK button.
R purlins will be formed.
Usage step |
|---|
The area to be created in R purlin  |
Selecting a profile from the profile list  |
Choosing the first of the steel beams or truss upper heads to be formed between the R purlins  |
Choosing the second steel beam or truss head  |
Editing settings in the R purlin settings dialog  |
Formation of R purlins   |
Next Topic