Analysis+Design performs the vertical load and modal analysis of the structure and the concrete and steel element design, including the foundation and slab analysis, depending on the Analysis Settings parameters. Horizontal and vertical load analysis is performed automatically, and the design results of concrete and steel elements are calculated automatically by automatically creating loading combinations.
Click the Analysis + Design icon in the ribbon menu for the operation, press the F9 key on the keyboard.
Do you want to perform analysis option will open.
When the OK button is clicked, the analysis + design process will start.
In the analysis status window, the steps and process times applied during the analysis + design process are given for information purposes.
Including slab and foundation analysis during the Analysis + Design process is optional in the Analysis Settings dialog.
Enter the Analysis Settings dialog.
Under the Analysis steps options in the Other tab, cancel or mark the options you want to exclude from the analysis.
Click the OK button to close the dialog.
In the semi-rigid diaphragm solution, slab analysis is taken into account in the analysis + design phase. The option cannot be canceled.
When the superstructure + basic interactive solution is made, the foundation analysis is taken into account in the analysis + design phase. The option cannot be canceled.
Next Topic
Related Topics