Specifications
Wall thickness
Give the thickness of the pool wall whose properties have been changed.
Upper elevation
Give the upper elevation of the pool wall. The height of the pool walls is equal to the pool height. The height of the pool wall will change according to the value entered in the upper elevation value. + or - can be given a value.
Upper left elevation
It changes the height of the upper left corner of the pool wall with the value entered here. Give a suitable value according to your system. For example, if you give the upper left elevation of a 200 cm high wall 25, you would define a wall with a constant slope with a base going from 200 to 225. To change the bottom slope of the pool, you can use the "set pool surface slope" command.
Upper right elevation
Changes the height of the upper right corner of the pool wall with the value entered here. Give a suitable value according to your system. For example, if you give the upper right elevation of a 200 cm high wall 25, you would define a wall with a constant slope with a base going from 200 to 225. To change the bottom slope of the pool, you can use the "set pool surface slope" command.
Side material
For the solid model, select the material (texture) of the side surfaces of the pool wall from the drop-down list.
Upper - under material
For the solid model, select the materials (textures) of the top and bottom surfaces of the pool wall from the drop-down list.
Texture world length
Texture length is entered. For example; If 1 is entered, the width of the selected material texture is taken as 1 unit and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.
Soil elevation
It is the elevation that determines the height of the soil on the side where the pool wall touches the ground.
Delta
Give the pool wall off the plan. The position of the wall in the plan will change according to the value entered in the top, middle bottom and udefinition.
