Creating a Connection Beam
- Zeynep Aladağ
With the connection beam command, connection beams are created between single footings or strip footings. Single footings can be connected in both directions, while strip footings can be connected at the column or wall alignments and at any point of the column or wall.
Location of Connection Beam Command
You can access it under the Concrete tab, Foundation title in the ribbon menu.
Usage Steps
To define a connection beam between the two columns above;
Click on the Connection Beam icon in the ribbon menu .
The beam toolbar will open.
Move the mouse cursor over the column. When the cursor changes shape, click the left mouse button.
Your connection beam will move with the movement of your mouse.
Enter the connection beam dimensions in the dimension boxes in the beam toolbar. As you enter the value, the preview of your connection beam will change.
You can define your connection beam by holding it from different points (lower corner, middle or upper corner) by clicking the alignment button in the beam toolbar or pressing the spacebar. Every time you press the spacebar, your alignment will change.
After you have determined the first point of your connection beam, place the cursor on the second column.
When the cursor changes shape, click the left button again. The program will create a preview of your next connection beam.
Press esc to exit the command. Your connection beam will be formed.
Usage step |
|---|
Creating the first point of the connection beam  |
Changing connection beam dimensions |
Changing the delta by pressing the spacebar on the keyboard |
Creating a preview of the new connection beam by creating the second point |
Completing the connection beam creation process |
Next Topic