/
Hole and Bolt Parameters
Hole and Bolt Parameters
- Zeynep Aladağ
Owned by Zeynep Aladağ
Bolt size, bolt grade and bolt hole type are determined for bolted steel connections with the Hole & Bolt Parameters dialog. Any connection with bolts has this dialog in the connection settings.
Specifications |
|---|
Round hole One of the normal, oversize or custom round hole types is chosen. If a custom round hole type is selected, the wanted value can be given. |
Slotted hole One of the short, long or custom slotted hole types is chosen. If a custom slotted hole type is selected, the wanted value can be given. |
Bolt size Bolt size is selected from the list. |
Bolt grade Bolt grade is selected from the list. |
Next Topic
, multiple selections available,
Related content
Geometry Control for Connection Design per AISC 360-16
Geometry Control for Connection Design per AISC 360-16
More like this
Geometry Control for Connection Design
Geometry Control for Connection Design
More like this
Steel Connection geometry not satisfied.
Steel Connection geometry not satisfied.
More like this
Connections Overview
Connections Overview
More like this
Single Angle Connection Design per AISC 360-16
Single Angle Connection Design per AISC 360-16
More like this
Modelling Steel Connections - 2
Modelling Steel Connections - 2
More like this