/
Earthquake overturning moment control could not be achieved
Earthquake overturning moment control could not be achieved
The Complete Message:
Earthquake overturning moment control in (X / Y) direction could not be achieved.
This message is given if the ratio of the sum of the overturning moments for the whole structure, the sum of the protective moments, is greater than 0.5.
Intermediate values and control results are given in the Earthquake Tipping Control report.
Possible solutions:
Architecturally, the building floor area / height ratio can be reviewed.
Increasing the basic ampate size contributes to the solution.
Bringing the center of mass closer to the building geometric center. As the momentum decreases the column, the total moment of the overturner decreases.
See also:
Next Topic
, multiple selections available,
Related content
Overturning Moment Conditions
Overturning Moment Conditions
More like this
Overturning Moment Condition (0.75) for Shearwalls (4.3.4.6)
Overturning Moment Condition (0.75) for Shearwalls (4.3.4.6)
More like this
Overturning Moment Condition for Shearwalls (4.3.4.5)
Overturning Moment Condition for Shearwalls (4.3.4.5)
More like this
Shearwall Overturning Control
Shearwall Overturning Control
More like this
Overturning Moment of Shearwalls (4.3.4.8)
Overturning Moment of Shearwalls (4.3.4.8)
More like this
Overturning Moment of Walls with Coupling Beam (with Space) (4.5.4.3)
Overturning Moment of Walls with Coupling Beam (with Space) (4.5.4.3)
More like this