Columns
Messages in column controls and possible solutions are listed under this heading.
- Axial Capacity Insufficient in Column
- Maximum Pursmail in Colon Exceeded.
- Insufficient Reinforcement in Column
- Transverse reinforcement spacing error
- Column shear safety is not satistied
- Circular column diameter cannot be smaller than 350 mm.
- The smallest dimension of the columns cannot be smaller than 300 mm.
- Column longitudinal rebar diameter cannot be less than Ø14.
- Circular column longitudinal rebar count cannot be less than 6.
- αi < 0.70
- Column capacity ratio > 1
- Steel column PMM ratio not satisfied.
- Steel column shear strength not satisfied.
- Strong column/weak beam criteria is not fulfilled
- Steel column section dimensions do not conform to Width-to-Thickness Ratios.
Next Topic