Strong column/weak beam criteria is not fulfilled

This message is created by specifying the element name and floor on which it is located at the beginning of the report.

For example,

SC001 BASE STORY Strong column/weak beam criteria is not fulfilled.

AISC 341-16 E3, and TBDY 2018 9.3.2, in the earthquake direction considered, at each beam-column node of highly ductile steel frames with special moment frame. The following relationship shall be satisfied at beam-to-column connections.

Open

Column-Beam Moment Ratio Check for SMF per AISC 341-16 with ideCAD

Solutions:

• The cross-sectional dimensions of columns whose names and floors are given can be enlarged.

• Columns can be connected to beams in the direction of their strong axes.

• If the structure is suitable, beam dimensions can be reduced accordingly.

Symbols

M_pc : Sum of the projections of the nominal flexural strengths of the columns above and below the joint
M_pb : Sum of the projections of the expected flexural strengths of the beams at the plastic hinge locations to the column centerline, kip-in.