/
Single footing area cannot be less than 1m².
Single footing area cannot be less than 1m².
- Zeynep Aladağ
Owned by Zeynep Aladağ
The Complete Message:
Single foundation area cannot be less than 1m². (TS500 10.3.2)
Solution:
The product of the dimensions of solid and named single footings should provide at least 1m 2 .
Select single footing, single footings.
Enter the properties.
In the General Settings tab, enter enough value to provide 1m2 area in the Dimension X and Dimension Y lines.
, multiple selections available,
Related content
Single footing size cannot be less than 70 cm.
Single footing size cannot be less than 70 cm.
More like this
Single footing thickness cannot be less than 25 cm.
Single footing thickness cannot be less than 25 cm.
More like this
Foot height cannot be less than 200mm.
Foot height cannot be less than 200mm.
More like this
Single footing thickness cannot be less than 1/4 of the cantilever opening.
Single footing thickness cannot be less than 1/4 of the cantilever opening.
More like this
Strip footing beam height cannot be less than 1/10 of the span.
Strip footing beam height cannot be less than 1/10 of the span.
More like this
Slab thickness is insufficient
Slab thickness is insufficient
More like this