Single footing thickness cannot be less than 1/4 of the cantilever opening.

The Complete Message:

Single footing thickness cannot be less than 1/4 of the cantilever opening. (TS500 10.3.2)


 

Solution:

  • It can be increased the thickness of solid and so called single footings.

  • Column can be enlarged to reduce cantilever opening

  • The single footing size can be reduced.

  1. Select single footing, single footings.

  2. Enter the properties.

  3. In the general settings tab, enter the appropriate size in the Dim X and Dim Y lines.

  4. You can change the thickness in the same place.


Next Topic

Steel Purlins, Steel Ties and, Secondary Steel Beams