/
Foot height cannot be less than 200mm.
Foot height cannot be less than 200mm.
- Zeynep Aladağ
Owned by Zeynep Aladağ
The Complete Message:
Continuous foundation ampathom height cannot be less than 200mm. (TS500 10.4.2)
Give the ampate height of the solid and so-called strip footing at least 20 cm.
Choose the strip footing, strip footings.
Enter the properties.
In the General Settings tab, enter at least 20 cm in the Upper H2 and Under H2 lines and click the OK button.
Next Topic
, multiple selections available,
Related content
Strip footing beam height cannot be less than 1/10 of the span.
Strip footing beam height cannot be less than 1/10 of the span.
More like this
Single footing size cannot be less than 70 cm.
Single footing size cannot be less than 70 cm.
More like this
Single footing thickness cannot be less than 25 cm.
Single footing thickness cannot be less than 25 cm.
More like this
Single footing area cannot be less than 1m².
Single footing area cannot be less than 1m².
More like this
Single footing thickness cannot be less than 1/4 of the cantilever opening.
Single footing thickness cannot be less than 1/4 of the cantilever opening.
More like this
Strip Footing Maximum Pursmail Exceeded.
Strip Footing Maximum Pursmail Exceeded.
More like this