/
Strip footing beam height cannot be less than 1/10 of the span.
Strip footing beam height cannot be less than 1/10 of the span.
- Zeynep Aladağ
Owned by Zeynep Aladağ
The Complete Message:
Continuous foundation beam height cannot be less than 1/10 of the free span. (TS500 10.4.2)
Solution:
Increase the thickness of the solid and called strip footings until the condition is met.
Choose the strip footing, strip footings.
Enter the properties.
In the General Settings tab, enter the value provided in the height line and click the OK button.
Next Topic
, multiple selections available,
Related content
Foot height cannot be less than 200mm.
Foot height cannot be less than 200mm.
More like this
Single footing size cannot be less than 70 cm.
Single footing size cannot be less than 70 cm.
More like this
Single footing thickness cannot be less than 25 cm.
Single footing thickness cannot be less than 25 cm.
More like this
Single footing area cannot be less than 1m².
Single footing area cannot be less than 1m².
More like this
Single footing thickness cannot be less than 1/4 of the cantilever opening.
Single footing thickness cannot be less than 1/4 of the cantilever opening.
More like this
The beam height cannot be more than 3.5 times the beam width.
The beam height cannot be more than 3.5 times the beam width.
More like this