Creating an Inclined Beam

With the right delta elevation feature, an inclined beam is formed by giving the elevation value to the right end of the concrete beam.

The inclined beam is also created with the Incline Objects command.

Location of Right Delta Elevation Feature

You can access the right delta elevation feature from the Beam Settings dialog.

Usage Steps

  • Select the beam you will incline and enter its settings.

  • Enter the elevation value in the right delta elevation line.

  • Click the OK button to close the dialog.

  • Your beam will change according to the value you enter.

  • You can adjust the elevations after you have defined the beams, or before you draw the beams.

Usage step

Usage step

Beam before right delta elevation changes

Choosing the beam to be inclined

Entering a value to the right delta elevation

Beam after right delta elevation change


Next Topic

Shearwall