When you define an inclined system with the Incline Objects command, the elevation of the beams and columns automatically changes. You can follow the defined system from 3D view.
The Bevel Objects command can be used to make a floor slab with a horizontal position with undefined elevations .
Create the flooring.
After clicking the tile icon, click the Slope Objects icon in the toolbar that appears .
Select floors that you would describe as slanted flooring.
Press the right mouse button again. The program "Would you like to also select slab bound objects?" will ask the question.
Click the OK button.
Click two points in turn to indicate the direction you want to bevel. The first point you choose will determine the beginning of the slope plane.
The Slope Options dialog will open after the process . Enter the slope related parameters in the dialog.
When you click the OK button, the slope will occur.
The parameters available in the slope options dialog are:
Specifications | Explained |
|---|---|
Starting point | Indicates the location from which the slope will start. The values given in the starting point section indicate from which elevation the beginning of the slope will begin. |
Starting level | Give the starting level according to the selected level. |
According to the floor ceiling | The elevation value given is taken from the floor of the floor. |
According to floor base | The elevation value given is taken from the floor of the floor. |
Global | The level value given is taken from the generally defined zero elevation of the floor, independent of the floors worked. |
End level = starting elevation + | In the direction of the given slope direction, the end level is found by adding the value entered in the box and the starting level. A negative value can also be entered to change the direction of the slope. |
Pain | Objects selected according to the given angle value are arranged inclined. |
Rate | Objects selected according to the given ratio value are arranged with a slope. |