Geometry control is used to check the presence of problematic objects in geometric, placement and size on any floor. The program lists the results on the screen at the end of the control and automatically selects the objects according to the user's preferences.
Click the Tools / Geometry Control line in the classic menu and the Tools / Tools / Geometry Control icon in the ribbon menu .
In the dialog that appears on the screen, mark the conditions to be checked for geometry, specify whether the control will be made for all floors and enter the minimum object length (Zero value means no length control).
Click the OK button. The program will report whether problem situations are found or not, and list problematic objects, if any.
Minimum object length: Lengths of short walls, short beams and short continuous foundations min. will be compared with the object length and objects shorter than this length will be marked.
Apply to all floors: If checked, controls will be made for all floors.
Short objects: When checked, if there are objects with smaller openings than the value entered in the Minimum Object Length line, the program lists these objects.
Overlapping objects: Lists overlapping objects.
Column / beam-curtain intersections: Listed if there are beams, walls and columns that cross each other and are not statically related. This situation is caused by the beam or curtain not coming into contact with the column.
Vertical continuity: It checks the case of vertical elements such as columns and walls to be cut in intermediate floors and forming faulty foundations. It occurs when the elevations of columns and curtains or element misalignments are given incorrectly.
Objects with the same name: Detects objects with the same names. Check the necessity of the object with the same name.
Floor levels: Controls the relationship between floors and beams. For example, this error is encountered if the level of a slab is given in a way that it does not connect to any beam.
Check sloping floors: Checks whether the floors have been entered in accordance with the rules in sloping systems such as roof tiles.
Possible objects placed at wrong angle: List minor angle entities. Check if the angles of these objects are suitable for the project.
Faulty doors / windows: It is checked whether the doors / windows are inside the wall.
