Mirror Door/Window Label
The direction of the door/window dimensioning label can be adjusted from the door window settings, and it is possible to change the direction of the label while placing the door/window. The dimensions are smart and when the label direction is changed, the text changes automatically according to the direction of the door/window. Label direction can be changed by clicking the "Mirror Door/Window Label" icon on the door/window toolbar.
Location of Mirror Door/Window Label Command
The Mirror Door/Window Label command that appears after the Door/Window command is run is available in the auxiliary toolbar.
Usage Steps
Click the Door/Window icon in the ribbon menu .
At the end of the cursor, the image of the door/window will be created. If the door/window label circle is not on the side you want, click the "Mirror Door/Window Label" icon from the door/window toolbar. You can also run label mirror by pressing the 1 key on the keyboard. The direction of the label will change.
Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door/window drawing will be completed.
Usage step |
|---|
Determining the location of the door / window  |
Getting symmetry by clicking the symmetry icon or pressing the 1 key  |
Mirror X
The "Mirror X" command is used to set the in-and-out opening direction of the door / window. In other words, the "Mirror X" command takes the symmetry of the door / window with respect to the wall axis. This process can be done during or after the door / window is installed.
To determine the opening direction before placing the door window:
Click the Door-Window icon in the ribbon menu .
At the end of the cursor, the image of the door / window will be created. Click the "Mirror X" icon from the door / window toolbar to open the door / window in or out. You can also run the "Mirror X" command by pressing the 2 key on the keyboard.
Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door / window drawing will be completed.
To change the opening direction of a placed door / window:
Select the door / window you want to change the opening direction by clicking with the left mouse button and click the right mouse button.
In the Door / Window Settings dialog that opens, switch to the Placement tab.
Click the box in front of the X Mirror line here by clicking the left mouse button.
When you exit the dialog by clicking the OK button, the X opening direction of the door / window you selected will change.
Mirror Y
The "Mirror Y" command is used to adjust the right / left opening direction of the door / window. In other words, the "Mirror Y" command takes the symmetry of the door / window with respect to the door / window center axis perpendicular to the wall axis. This process can be done during or after the door / window is installed.
To determine the opening direction before placing the door window:
Click the Door-Window icon in the ribbon menu .
At the end of the cursor, the image of the door / window will be created. Click the "Mirror Y" icon from the door / window toolbar to open the door / window in or out. You can also run the "Mirror Y" command by pressing the 3 key on the keyboard. The opening direction of the door / window will change.
Place the mouse cursor on the wall where you want to place the door / window and click the left mouse button. Door / window drawing will be completed.
To change the opening direction of a placed door / window:
Select the door / window you want to change the opening direction by clicking with the left mouse button and click the right mouse button.
In the Door / Window Settings dialog that opens, switch to the Placement tab.
Click the box in front of the Y Mirror line here with the left mouse button.
When you exit the dialog by clicking the OK button, the Y opening direction of the door / window you selected will change.