Design
The parameters used in the design are intervened in the Design tab. If a mark is placed in the box, the coefficient written in the box is used in the design calculation. If no mark is placed in the box, the program automatically calculates these coefficients and uses them in the design.
Bracketed length ratio (LTB) | The ratio of the length between two elements connected to the element for the respective direction to the entire element length to be used in the lateral torsion buckling calculation |
Flexural coefficient (C b ) | The moment correction coefficient is calculated according to the Steel Structures Regulation Equation 9.1. |
Deflection border | It is the element-based limit value specified in the relevant Steel Structures regulation used in the design. The limit value must be changed by the user according to the situations where the secondary beam is used. |
The control is given in the steel design - golden beam - details section after analysis and design.