Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

With the Entity From Primitives command, you can convert your two-dimensional drawings, such as axis, column, beam, wall and shearwall, drawn in their own layers, saved as dxf/dwg from the architecture, into ideCAD objects.

In the conversion process, it is important that the outer borders of the drawings of elements such as columns and curtains are closed and the layer you choose is important. Drawings on the layers you selected are converted into objects.

Location of Entity From Primitives Command

You can access it from the Ribbon menu Tools tab Generate.

Entity From Primitive Dialogue

Options

Scales the drawing according to the given scaling criteria.

 Moreover

First, the elements to be scaled are selected. Then the right mouse button is pressed. The point on which the scaling will be based is selected. In the next step, "two points where you know the distance value from the current drawing" are selected. The scaling process is completed by giving a new distance value according to these points.

Converts drawings in the project being read into axis objects.

Converts drawings in the project being read into column objects.

Converts drawings in the project being read into shearwall objects.

Converts the drawings in the read project into wall objects.

Converts drawings in the project being read into beam entities.

Undoes the last action performed.

Reactivates the last action that was undone.

Opens the list of layers.

Usage Steps

  • Click the Entity From Primitives icon.

  • Entity From Primitives dialog will open.

  • Choose which object to convert. For example, click on the column icon.

  • Select the layer -column-layer of the drawings you want to convert from the pop-up window.

  • Click the OK button to close the dialog.

  • Your drawings outside the layer you selected will be faded.

  • Select your drawings you want to convert and click the right mouse button.

  • Your columns will form.

Usage step

 Before entity from primitives

Choosing which object to convert - choosing a column

Selecting the drawing layer -column-layer that you want to convert from the window that opens

Selecting the drawings you want to convert

After entity from primitives

  • No labels