Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

  • Shear strength is calculated automatically


İnternational Design Codes

ACI 318-19 : One-Way Shear Strength

TSC 2018 : TSC One-Way Shear Strength


Notation in ACI 318-19

Ac-sh = area of concrete used to determine shear stress, in2
Ag = gross area of concrete section, in2
bw = web width or diameter of circular section, in.
d = distance from extreme compression fiber to centroid of longitudinal tension reinforcement, in.
fc ' = specified compressive strength of concrete, psi
(fc')0.5 = square root of specified compressive strength of concrete, psi
fyt = specified yield strength of transverse reinforcement, psi
h = overall thickness, height, or depth of member, in.
Nu = factored axial force normal to cross section occurring simultaneously with Vu or Tu; to be taken as positive for compression and negative for tension, lb
s = center-to-center spacing transverse reinforcement, in
Vc = nominal shear strength provided by concrete, lb
Vn = nominal shear strength, lb
Vs = nominal shear strength provided by shear reinforcement, lb
Vu = factored shear force at section, lb
ϕ = strength reduction factor
λ = modification factor to reflect the reduced mechanical properties of lightweight concrete relative to normalweight concrete of the same compressive strength
λs = factor used to modify shear strength based on the effects of member depth, commonly reffered to as the size effect factor


Nominal one-way shear strength at a section, is calculated by using concrete and transverse reinforcement properties.

  • No labels