It is the type of hatching created by intersecting the lines drawn at certain intervals. In the Scan Hatch Settings dialog, the distance between these two lines, the angle between them and the global angle of the scan hatch can be adjusted.
| Table of Contents |
|---|
...
Location of the Parametric
...
Hatch Command
...
In the Architectural Program
You can access it under the Ribbon menu, Drawings tab, Scan Hatch heading.
...
In
...
Structural Program
You can access it under the Ribbon menu, Drawings tab, Scan Hatch heading.
...
...
Hatch Toolbar
...
Icons | ExplainedDescriptions | Views |
|---|---|---|
Parametricscanninghatch | Click to draw parametric scanhatch. |  Defined scan |
User defined hatch | Click to draw a user defined hatch. |  |
Bitmapscanninghatch | Click to draw a bitmap scanhatch. |  Crawl space |
Hatch hole | Used to create a space hole in the scan hatch object. |  |
Create user definedscanhatch | Creates hatching hatch style from drawn primitive objects. |  |
Define scan Set hatch referencepoint | Scan Hatch changes the reference point. |  |
Add point | Adds a new point for scanninghatch. |  |
Delete Remove point | Deletes an existing point in the scanhatch. |  |
Automaticscanninghatch | Automatically creates a closed area scan hatch without entangling the edges. |  |
Finda crawl spacehatch holes | While in auto scan hatch mode, it creates a scan hatch from two closed inside areas to the outer area, leaving the inner area as a space. |  |
Draw Add lineson theto edges | Draws lines on the scan hatch edges. |  |
Settings | The scan hatch settings dialog opens. |  |
...
Usage Steps
To create a scanhatch;
Click the Parametric ScanHatch icon in the ribbon menu .
Create a closed polygon by clicking with the left mouse button in the drawing area.
Scanning Hatch will occur when you close the polygon.
Process stepSteps order | Parametric scanning hatch creation |
|---|---|
Determining the first point of the closed polygon to be created for scanninghatch |  |
Determining the second point of the closed polygon |  |
Determining the third point of the closed polygon |  |
Determining the fourth point of the closed polygon |  |
Determining the end point of the closed polygon |  |
Creation of parametric scanninghatch |  |
Location of Parametric
...
Hatch Settings Dialog
Parametric
...
Hatch Command Settings
After running the Parametric Scan Hatch command, you can access it by clicking the Settings icon in the Scan Hatch utility toolbar that appears on the screen. The settings you make will be valid for the scans hatchs you draw.
...
Parametric Scan Object Settings
Select the scan you want to enter its settings, click the right button of the mouse and click the Properties line from the menu that opens. The settings you make will be applied to the scan you selected.
...
Parametric
...
Hatch Settings
...
Specifications | ExplainedDescriptions |
|---|---|
Color  | Determines the scan hatch color. When the color box is clicked, the appropriate color is selected from the window that opens. |
Scan Hatch angle  | The angle of the scan hatch is entered. The scans hatches are drawn at the slope entered. |
Offset distance  | The offset distance is used to extend the scan hatch beyond or into defined limits. |
Horizontal angle  | Horizontal lines are drawn according to the angle value entered here. Angle 90 o when degrees, horizontal and vertical lines are formed perpendicular to each other by crossing parametric screening. |
Horizontalscanning rangeoffset  | The distance between the horizontal scan hatch lines. These lines are always drawn horizontally. The angles change if the scan hatch angle is changed. |
Verticalscan rangeoffset  | The distance between vertical scan hatch lines. The angle between these lines and the horizontal scan hatch lines is determined by the angle parameter in this section. |
Scan Hatch preview | The preview of the scan hatch is available on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. |
...