It is the type of hatching created by intersecting the lines drawn at certain intervals. In the Scan Settings dialog, the distance between these two lines, the angle between them and the global angle of the scan can be adjusted.
Parametric Scan Command Location
In the Architectural Program
You can access it under the Ribbon menu, Drawings tab, Scan heading.
In Static Program
You can access it under the Ribbon menu, Drawings tab, Scan heading.
Scan Toolbar
Icons | Explained | Views |
|---|---|---|
Parametric scanning | Click to draw parametric scan. |  |
Defined scan | Click to draw a defined hatch. |  |
Bitmap scanning | Click to draw a bitmap scan. |  |
Crawl space | Used to create a space in the scan object. |  |
Create user defined scan | Creates hatching style from drawn primitive objects. |  |
Define scan reference point | Scan changes the reference point. |  |
Add point | Adds a new point for scanning. |  |
Delete point | Deletes an existing point in the scan. |  |
Automatic scanning | Automatically creates a closed area scan without entangling the edges. |  |
Find a crawl space | While in auto scan mode, it creates a scan from two closed inside areas to the outer area, leaving the inner area as a space. |  |
Draw lines on the edges | Draws lines on the scan edges. |  |
Settings | The scan settings dialog opens. |  |
Parametric Scan Creation Process Steps
To create a scan;
Click the Parametric Scan icon in the ribbon menu .
Create a closed polygon by clicking with the left mouse button in the drawing area.
Scanning will occur when you close the polygon.
Process step | Parametric scanning creation |
|---|---|
Determining the first point of the closed polygon to be created for scanning |  |
Determining the second point of the closed polygon |  |
Determining the third point of the closed polygon |  |
Determining the fourth point of the closed polygon |  |
Determining the end point of the closed polygon |  |
Creation of parametric scanning |  |
Location of Parametric Scan Settings Dialog
Parametric Scan Command Settings
After running the Parametric Scan command, you can access it by clicking the Settings icon in the Scan utility toolbar that appears on the screen. The settings you make will be valid for the scans you draw.
Parametric Scan Object Settings
Select the scan you want to enter its settings, click the right button of the mouse and click the Properties line from the menu that opens. The settings you make will be applied to the scan you selected.
Parametric Scan Settings
Specifications | Explained |
|---|---|
Color | Determines the scan color. When the color box is clicked, the appropriate color is selected from the window that opens. |
Scan angle | The angle of the scan is entered. The scans are drawn at the slope entered. |
Offset distance | The offset distance is used to extend the scan beyond or into defined limits. |
Horizontal angle | Horizontal lines are drawn according to the angle value entered here. Angle 90 o when degrees, horizontal and vertical lines are formed perpendicular to each other by crossing parametric screening. |
Horizontal scanning range | The distance between the horizontal scan lines. These lines are always drawn horizontally. The angles change if the scan angle is changed. |
Vertical scan range | The distance between vertical scan lines. The angle between these lines and the horizontal scan lines is determined by the angle parameter in this section. |
Scan preview | The preview of the scan is available on the screen. The settings made in the dialog are simultaneously reflected on the preview screen. |