...
You can access the Settings icon from the Route Segments dialog that opens after entering the Pattern Path command under the Primitives title of the ribbon menu Drawings tab .
...
Pattern Path Settings
...
Specifications |
---|
Color Sets the color of the pattern path. When the color box is clicked, the appropriate color is selected from the window that opens. |
Line thickness Line thickness of the pattern path is selected. The appropriate thickness is selected from the drop-down list when the down arrow button next to the box is clicked. The thickness selected here is only valid on the screen. It does not affect the drawing printouts. |
Pattern thickness Pattern thickness is entered. |
Scale The ratio/scale of the pattern according to the design state is entered. |
Pattern path list The registered pattern pathes are listed. The desired pattern path is selected from the list. |
Connection The connection type is selected for the points where two edges such as corner on the pattern line are connected. |
title | Moreover |
---|
Cut option Separate option None option |
Delta It is the option that determines the reference point where the pattern line will be defined. While the lower, middle or upper point can be used as a reference, the distance entered in relation to the upper edge of the line can also be used with the defined option. The entered distance cannot be greater than the line thickness. |
Preview It contains the pattern path to be formed and the preview of the selected connection. |