Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

The pattern path object draws a pattern path in the continuous line forum in straight, curve and arc mode by defining the patterns created with primitive objects. The pattern path object is used to facilitate the pattern creation or hatching process on a line length in the plan plane.

Location of Pattern Path Settings

You can access the Settings icon from the Route Segments dialog that opens after entering the Pattern Path command under the Primitives title of the ribbon menu Drawings tab .

Pattern Path Settings

Specifications

Color

Sets the color of the pattern path. When the color box is clicked, the appropriate color is selected from the window that opens.

Line thickness

Line thickness of the pattern path is selected. The appropriate thickness is selected from the drop-down list when the down arrow button next to the box is clicked. The thickness selected here is only valid on the screen. It does not affect the drawing printouts.

Pattern thickness

Pattern thickness is entered.

Scale

The ratio/scale of the pattern according to the design state is entered.

Pattern path list

The registered pattern pathes are listed. The desired pattern path is selected from the list.

Connection

The connection type is selected for the points where two edges such as corner on the pattern line are connected.

 Moreover

Cut option

Separate option

None option

Delta

It is the option that determines the reference point where the pattern line will be defined. While the lower, middle or upper point can be used as a reference, the distance entered in relation to the upper edge of the line can also be used with the defined option. The entered distance cannot be greater than the line thickness.

Preview

It contains the pattern path to be formed and the preview of the selected connection.

  • No labels