It is possible to create an inclined beam by giving the elevation value to the right delta elevation feature in the program .
You can also create the inclined beam with the Incline Objects command.
Location of Right Delta Elevation Feature
You can access the right delta elevation feature from the Beam Settings dialog.
Usage Steps
Select the beam you will incline and enter its settings.
Enter the elevation value in the right delta elevation line.
Click the OK button to close the dialog.
Your beam will change according to the value you enter.
You can adjust the elevations after you have defined the beams, or before you draw the beams.
Usage step |
|---|
Beam before right delta elevation changes  |
Choosing the beam to be inclined  |
Entering a value to the right delta elevation  |
Beam after right delta elevation change  |