/
9.3.1.3 Column Axial Capacity Control Report

9.3.1.3 Column Axial Capacity Control Report

Owned by Kemalcan Struja (Unlicensed)
Last updated: Oct 25, 2022 by Zeynep Aladağ
1 min read

  • Columns, which are part of the frame members with high ductility level, are designed and reported under the tensile and compressive forces obtained by increasing them with overstrength factor D.

Next Topic

9.3.1.4

Related Topics

 

Related content

9.4.1.3 Column Axial Capacity Control Report
9.4.1.3 Column Axial Capacity Control Report
Architecture & Structural Engineering
More like this
Column Axial Capacity Control Report for SMF per AISC 341-16 with ideCAD
Column Axial Capacity Control Report for SMF per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Design of Steel Columns for Combined Forces per AISC 360-16
Design of Steel Columns for Combined Forces per AISC 360-16
Architecture & Structural Engineering
More like this
9.3.1.3
9.3.1.3
Architecture & Structural Engineering
More like this
9.4.1.3
9.4.1.3
Architecture & Structural Engineering
More like this
Internal Forces Based on Design Given in the Reports of the Columns of Special Steel Moment Frames
Internal Forces Based on Design Given in the Reports of the Columns of Special Steel Moment Frames
Architecture & Structural Engineering
More like this