Remove Inner Cut of Edge

Remove Inner Cut of Edge command removes the gap created by define inner cut to edge on the sweep.

Location of Remove Inner Cut of Edge

You can access it from the Ribbon menu Modify tab under Entity Edit title.

Usage Steps

  • Click the Remove Inner Cut of Edge icon.

  • Click on the edge of the sweep that was previously cut.

  • Define inner cut to edge will erase the gap created.

Usage step

Usage step

The initial version of the sweep

Selecting the edge of the cut sweep

Selection of the inside cut for erasing

Deletion of the gap created with define inner cut to edge


Next Topic

Define End Cut to Edge