View of the Analysis Model

Details such as node point, element names, local axes to be displayed in the analysis model of the building are determined. Detail selection is made from the Analysis Model tab of the Visualization dialog.

Location of Analysis Model View Feature

Ribbon menu Concrete tab Structural Inspection heading under the Analysis Model by clicking the command Analysis Model can be accessed from the tab.

image-20240321-105759.png

Sample screenshot with all options checked

Analysis Model Tab

Specifications

Specifications

Show nodes and links

If checked, all nodes created to element joins in the analysis model are shown as red points.

Show node numbers

Activates if show node numbers is checked. If checked, the names of all joints are also shown.

Show supports

If checked, the supports in the frame system are shown.

Show element names

If checked, the names of the elements are shown above each element. For example K109, S1235 as the name of the element.

Show local axes of linear elements

If checked, the local axes of the linear elements are shown on the elements. For more detailed information on Linear Element Local Axes.

Show local axes of shells

If checked, the local axes of the shell elements are shown on the elements. For more detailed information on Shell Elements Local Axes.

Show hinges & end releases

If checked, the information of the elements with hinges and end releases is displayed on the element.

Extrude elements

If checked, the frame system is shown as solid (solid). If not checked, it is shown as a line (bar).

Show diaphragms

If this option is checked, after analysis, all diaphragms in the system are shown according to the selected story.


Next Topic

Deformations