/
Sectional Strength per ACI 318-19 §22

Sectional Strength per ACI 318-19 §22

Owned by oğuzcan hadim
Last updated: Jul 31, 2024 by İsmail Hakki BESLER
1 min read

ACI Chapter 22 applies to calculate nominal strength at sections of members, including (a) through (g):

(a) Flexural strength
(b) Axial strength or combined flexural and axial strength
(c) One-way shear strength
(d) Two-way shear strength
(e) Torsional strength
(f) Bearing
(g) Shear friction

Design strength at a section is calculated as the nominal strength multiplied by the valid strength reduction factor ϕ given in Strength Reduction Factors section.

Download ideCAD for ACI 318-19

Get Started for FREE Structural Engineering Software

Next Topic

Flexural Strength per ACI 318-19 with ideCAD

Related Topics

Related content

Load Factors and Combinations per ACI 318-19 with ideCAD
Load Factors and Combinations per ACI 318-19 with ideCAD
Architecture & Structural Engineering
Read with this
Sectional Strength.
Sectional Strength.
Architecture & Structural Engineering
More like this
TSC Sectional Strength
TSC Sectional Strength
Architecture & Structural Engineering
More like this
Flexural Strength.
Flexural Strength.
Architecture & Structural Engineering
More like this
Axial strength or Combined Flexural and Axial Strength per ACI 318-19 with ideCAD
Axial strength or Combined Flexural and Axial Strength per ACI 318-19 with ideCAD
Architecture & Structural Engineering
More like this
Flexural Strength per ACI 318-19 with ideCAD
Flexural Strength per ACI 318-19 with ideCAD
Architecture & Structural Engineering
More like this