Seismic Design Category (SDC) per ASCE 7-16 ยง11.6
- Hakan ลahin
- ฤฐsmail Hakki BESLER
- Zeynep Aladaฤ
- oฤuzcan hadim
SYMBOLS
SD1 = Long period design spectral response acceleration parameter for 1 s
SDS = Short period design spectral response acceleration parameter
Download ideCAD for ASCE 7-16
Structures are categorized into a Seismic Design Category according to their Risk Category and the design spectral response acceleration parameters, SDS and SD1, with Table 11.6-1 or 11.6-2.
SDS | I or II or III | IV |
|---|---|---|
SDS < 0.167 | A | A |
0.167 โค SDS < 0.33 | B | C |
0.33 โค SDS < 0.50 | C | D |
0.50 โค SDS | D | D |
ย
SD1 | I or II or III | IV |
|---|---|---|
SDS < 0.067 | A | A |
0.067 โค SDS < 0.133 | B | C |
0.133 โค SDS < 0.20 | C | D |
0.20 โค SDS | D | D |
Risk Category I, II, or III structures settled where SD1 is greater than or equal to 0.75 is designated to Seismic Design Category E. Risk Category IV structures settled where SD1 is greater than or equal to 0.75 is designated to Seismic Design Category F.
Download ideCAD for ASCE 7-16