Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

This message is created by giving the element name and story at the beginning of the report.

For example, N1 Ground. Floor, Capacity ratio >1

Three possible solutions to increase the beam capacity ratio less than 1 are explained below.

Possible Solutions

  • From the Beam Parameters window , you can activate the "Calculate the required reinforcement using the fiber model with" option.

  • From the Beam Reinforced Concrete window, reinforcement can be increased or beam dimensions can be enlarged.

  • Detailed information of the capacity ratios in beams can be seen in the Capacity design tab of the Beam Reinforced Concrete window . Using this section, it can be seen in which section of the beam, under which combination effect, the capacity ratio is exceeded and can be intervened appropriately.


  • No labels