Beam width cannot be less than 250mm.

The Complete Message:

Beam width cannot be less than 250mm. (TBDY 2018 7.4.1.1)


In TBDY 2018 Article 7.4.1.1 (a) , the beam body width will be at least 250 mm, it is stipulated. You are warned because the condition is not met.

Solution:

Give the width of the beam given the name and elevation of at least 250 mm.

  • Select the beam/beams

  • Enter the properties.

  • In the general tab, increase the beam width and click the OK button.


Next Topic

https://idecad.atlassian.net/wiki/spaces/IKP/pages/1100448857