/
Selecting Earthquake Ground Motion Level
Selecting Earthquake Ground Motion Level
- nurgül Kaya
- Zeynep Aladağ
Owned by nurgül Kaya
Last updated: Oct 31, 2022 by Zeynep Aladağ
ideCAD select the earthquake ground motion level that you will determine from Chapter 11.2 MCER, and use to define horizontal and vertical elastic design spectrum automatically. It uses two-third of the MCER.
According to ASCE 7-16, design response spectrum determined by multiplying the risk-targeted maximum considered earthquake (MCER) response spectrum by (2/3).
Next Topic
, multiple selections available,
Related content
Design Spectrum for Site-Specific Ground Motion
Design Spectrum for Site-Specific Ground Motion
More like this
Seismic Force Resisting System Selection ASCE 7-16
Seismic Force Resisting System Selection ASCE 7-16
More like this
Seismic Design Category (SDC) ASCE 7-16
Seismic Design Category (SDC) ASCE 7-16
More like this
Effective Seismic Weight Definition per ASCE 7-16 with ideCAD
Effective Seismic Weight Definition per ASCE 7-16 with ideCAD
More like this
Seismic Design Category (SDC) per ASCE 7-16 with ideCAD
Seismic Design Category (SDC) per ASCE 7-16 with ideCAD
More like this
Horizontal and Vertical Elastic Design Response Spectrum ASCE 7-16
Horizontal and Vertical Elastic Design Response Spectrum ASCE 7-16
More like this