Custom logoCustom icon
Templates

Architecture & Structural Engineering

  • All content
  • Space settings
  • Decision log
    Decision log
     This trigger is hidden
Results will update as you type.
  • What Is Integrated Design for AEC
  • Building Information Modeling
  • Customize ideCAD
  • Get Started
  • Model the Design
  • Integrated Building Design
  • Visualization
  • Integrated Structural Engineering
    • International Design Codes
      • ASCE 7-16 Seismic Design
      • ASCE 7-16 Strength-Based Design
        • Design Coefficients and Factors for Seismic Force-Resisting System per ASCE 7-16 §11.2
        • Conditions Regarding Ductility Levels of Structural Systems per ASCE 7-16 §11.2
        • Application of Overstrength Factor per ASCE 7-16 §12.2.1
        • Application of Deflection Amplification Factor per ASCE 7-16 §11.2.1
        • Redundancy Factor per ASCE 7-16 §12.3.4
        • Reduced Design Response Spectrum for Modal Analysis per ASCE 7-16 §12.9.1.2
        • Seismic Load Effects and Combination per ASCE 7-16 §12.4
        • Load Combination and Strength Design per ASCE 7-16 §2.3
        • Analysis Procedure Selection per ASCE 7-16 §12.6
        • Modeling Criteria per ASCE 7-16 §12.7
        • Modeling of Masses per ASCE 7-16 with ideCAD
        • Effective Section Stiffness per ASCE 7-16 §12.7.3
        • Equivalent Lateral Force Method (ELF) per ASCE 7-16 §12.8
        • Inherent Torsion per ASCE 7-16 with ideCAD
        • Accidental Torsion per ASCE 7-16 §12.8.4.2
          • Accidental Torsion per ASCE 7-16 with ideCAD
        • P-Delta Effects per ASCE 7-16 with ideCAD
        • Linear Dynamic Analysis Methods per ASCE 7-16 with ideCAD
        • Modal Response Spectrum Analysis per ASCE 7-16 §12.9.1
        • Scaling Design Values of Combined Response per ASCE 7-16 §12.9.1.4
        • Diaphragms, Chords, and Collectors per ASCE 7-17 with ideCAD
        • Determination and Limitation of Story Drifts per ASCE 7-16 §12.12
        • Foundation Design per ASCE 7-16 §12.13
      • ACI 318-19 Reinforced Concrete Design for American Standard
      • AISC 360-16 and AISC 341-16 Steel Design
      • Eurocode 3: Steel Design per EN 1993-1-1
      • EN 1991-1-4 - Wind Actions
      • Connection Design per AISC 360-16 & AISC 358-16
      • TSC 2018
      • TSC 2018 Wizard
      • Structural Steel Design Requirements of TSC 2018
      • ASCE 7-16 Seismic Wizard
    • Structural System Modeling
    • Structural Analysis
    • Earthquake-Resistant Design
    • Structural Design