/
Slenderness Ratio Report for SCBF design per AISC 341-16 with ideCAD

Slenderness Ratio Report for SCBF design per AISC 341-16 with ideCAD

Owned by nurgül Kaya
Last updated: Oct 05, 2023 by oğuzcan hadim
1 min read

How does ideCAD control the slenderness ratio according to AISC 341-16?

  • ideCAD Structural controls and reports brace slenderness ratio automatically.

The slenderness ratio is checked and reported automatically by the ideCAD Structural. Braces must have a slenderness ratio of KL / r ≤ 200.

Next Topic

Ductility Control Report for SCBF design per AISC 341-16 with ideCAD

Related Topics

Related content

Slenderness Ratio Report for OCBF design per AISC 341-16 with ideCAD
Slenderness Ratio Report for OCBF design per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Brace Requirements for SCBF per AISC 341-16 with ideCAD
Brace Requirements for SCBF per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Ductility Control Report for SCBF design per AISC 341-16 with ideCAD
Ductility Control Report for SCBF design per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Width-to-Thickness Ratios Report for SCBF per AISC 341-16 with ideCAD
Width-to-Thickness Ratios Report for SCBF per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Brace Requirements for OCBF per AISC 341-16 with ideCAD
Brace Requirements for OCBF per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this
Width-to-Thickness Ratios for OCBF per AISC 341-16 with ideCAD
Width-to-Thickness Ratios for OCBF per AISC 341-16 with ideCAD
Architecture & Structural Engineering
More like this